Water, humidity & temperature sensor (LoRaWAN)
Couldn't load pickup availability
The flood sensor detects the presence of water on its sensor pins and sends an alarm message to a LoRaWAN network when triggered. In addition, the device regularly reports the ambient temperature and humidity and sends an alarm if the readings exceed predefined thresholds, which can be set for both humidity and temperature.
The device itself is designed to stand on the floor, where three brass telescopic probes can detect water on both hard floors (tiles) and soft carpets. The device comes with a mounting bracket that can be screwed or glued to the wall or floor. When the main sensor is in the bracket, a super-thin sensor pad, connected to the bracket via a cable, is used for water detection.
The device is controlled via LoRaWAN commands. It operates as a LoRaWAN Class A device. Use of the device requires LoRaWAN network coverage. Otherwise, a separate LoRaWAN gateway must be installed and operated. For direct connection to the Aqua-Scope Monitor, please use FLOLWE02.
When an alarm is triggered, the device emits a tone and a red LED flashes. The device is powered by an internal CR123 battery, which lasts approximately 5 years under normal use.
- Detailed instructions for the installation and connectivity of Aqua-Scope products can be found here .
Do you have a question about the product? Feel free to contact us:
Here you will find the declaration of conformity for the Aqua-Scope products.